Altana Spectro-Guide Sphere Gloss Manual Manual do Utilizador descarregar pdf (Página 57)

Options

You can toggle menu options on or off by moving the

cursor to the option and pressing the Operate button

to make the check mark appear or disappear. If you

would like to allow only the display time, beeper,

and trigger to be set in the “Setup” menu, move the

cursor to each option you wish to disable and press

the Operate button.

The check marks behind these options disappear.

When you are finished with your selection, you can

store the modified menu. To do this, move the

cursor to the “Exit” option. This option appears in

the “Options” menu in place of “Configure.” Press

the Operate button, and the modified menu is

stored. The new instrument settings are taken effect

at the same time.

If you wish to reactivate “Custom1" (or ”Custom2")

at a later time, move the cursor to “Configure /

Custom1 (or Custom2)” press the operate button.

After the “Protected option!" message appears,

press the

buttons simultaneously for 5 seconds. When you

open the “Setup” menu from the “Options” menu

again, only those options which were check-marked

appear now.

When shipped, Custom1 and Custom2 contain

predefined settings, which can be found on the next

page.

std

File Display

Color sys

Index Disp Time

IIIum/Obs

Beeper

Calibr.

Set Time

Trig adj

Exit

Language

Option

E94Ratio

Setup

Gloss

File Display

Color sys

Index Beeper

IIIum/Obs

Trig adj

Calibr.

Configure

Option

Disp Time

Setup

Gloss

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 73 74

Comentários a estes Manuais

Sem comentários

Altana Spectro-Guide Sphere Gloss Manual Manual do Utilizador Página 57

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Altana Spectro-Guide Sphere Gloss Manual