Altana LCS III Manual do Utilizador descarregar pdf (Página 40)

100

101

Standard Operations

5. Insert the sample cuvette/cell.

6. The result of the color calculation is displayed.

Note: The control bar displayed on the right of the displayed result

shows the relationship of the measurement result to the measuring

range.

7. For the next measurement, remove the cuvette/sample cell and

insert the next sample cuvette/cell or press Measure to

measure the same sample again.

5.5.1.1 Touch-sensitive areas on the measurement window

On the screen are touch-sensitive areas where the user has

immediate access to special software options.

Figure 7 Touch-sensitive areas on the measurement window

1 Open Operator ID to change or add operator ID

(see section 5.2.1 on page 17 )

5 Change Upper Limit of color range (see section

5.5.1.4 on page 42)

2 Open Sample ID to change or add sample ID

(see section 5.2.2 on page 18)

6 Change Lower Limit of color range (see section

5.5.1.4 on page 42)

3 Open Select Color Scale and select scale for

display (see section 5.5.1.3 on page 41)

7 Change Date & Time (see section 5.2.3 on page

20)

4 Change the displayed color scale to the next color

system which is selected in the Operator ID color

scale list for display. (see section 5.5.1.3 on page

41)

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 369 370

Comentários a estes Manuais

Sem comentários

Altana LCS III Manual do Utilizador Página 40

Comentários a estes Manuais

Manuais e produtos relacionados com Instrumentos de medida Altana LCS III